Daily food safety checklist for a restaurant: opening, midday and closing
A daily food safety checklist for a restaurant is a short list of checks done at three points in the day, each with a limit and a place to sign: at opening (units, thermometers, hand sinks, sanitizer), midday (holding temperatures and date labels) and closing (cooling, labeling, cleaning). Done every day and signed, it is the record an inspector asks to see.
This guide is for restaurant owners, kitchen managers and shift leads who want one checklist their team will fill in. It gives the full list by time of day, with the limit beside each line, a layout you can print, who signs, and what to do when a line fails. The limits come from the FDA Food Code, so check them against your county's version [1]. For the plan and logs built for your menu, see your plan.
Want the checklist built from your menu? See the plan and logs built from your menu. No card.
How the checklist works
There are three rules that keep a checklist alive:
- Every line has a limit or a yes/no test. "Check fridge" is a wish. "Walk-in at 41°F or below: ___°F" is a check.
- Every line has a fix. The sheet says what to do when the line fails, so the cook does not have to ask.
- One named person signs each block. A sheet signed by "kitchen" is a sheet nobody owns.
The checklist below has 32 lines. That sounds like a lot; most take under 30 seconds, and the whole opening block takes about ten minutes. If your kitchen is small, cut lines you do not need (no buffet, no cooling), and keep the rest. The test for a line is: "would we find out about this at an inspection, or after a customer gets sick?" If yes, it stays.
Opening checks (before prep)
| # | Check | Limit or test | Fix if it fails |
|---|---|---|---|
| 1 | Staff health: anyone with vomiting, diarrhea, fever, jaundice or a sore throat with fever? | None working with food | Send them home; follow your health department's return rule |
| 2 | Hand sinks: hot water, soap, paper towels, a bin, nothing in the sink | All present and working | Restock; report a broken tap today |
| 3 | Walk-in cooler reading | 41°F or below | Move food to a cold unit; see walk-in cooler not reaching temperature |
| 4 | Reach-ins and prep rails, food read with a probe | 41°F or below | Move food, check the unit, recheck in 30 minutes |
| 5 | Freezers | 0°F or below is a common target; food hard | Check door seal; discard if thawed and refrozen |
| 6 | Thermometers: probe reads 32°F in ice water (±2°F) | Within 2°F | Recalibrate or replace |
| 7 | Sanitizer bucket or dispenser at label strength, test strip | As the label says (quat is often 200 to 400 ppm) | Remake and retest |
| 8 | Dish machine: wash and rinse, as the label says | Per machine label | Stop use; call service |
| 9 | Date labels on prepared food from yesterday | Use by day 7 at 41°F or below; day 1 is the day made | Discard anything past the date or with no label |
| 10 | Raw meat stored below ready-to-eat food | Correct order on shelves | Reshelve now |
| 11 | Deliveries: probe the cold items | 41°F or below; eggs 45°F air; frozen solid | Reject or log a corrective action |
| 12 | Ice machine: scoop outside the bin, ice clear | Yes | Discard ice, clean, log it |
| 13 | Pests: droppings, live insects, gaps in doors | None seen | Call the service; log it |
| 14 | Chemicals stored away from and below food | Yes | Move now |
Lines 3 to 5 are the same as the ones in the walk-in cooler log and the refrigerator temperature log; lines 6 and 7 have their own sheets in the thermometer calibration log and the sanitizer concentration log. If you already keep those, tick the box and reference them. The delivery line is the receiving log.
Midday checks (during service)
| # | Check | Limit or test | Fix if it fails |
|---|---|---|---|
| 15 | Hot holding, probe in each pan (first check at the start of service, then at least every 2 hours) | 135°F or above | Reheat to 165°F within 2 hours; discard if you cannot say how long it was low |
| 16 | Cold holding on the line and prep rail, probe in top pan | 41°F or below | Move to a cold unit, recheck |
| 17 | Cooking: probe the thickest part of chicken, ground meat, whole cuts | 165°F, 155°F, 145°F | Keep cooking, recheck |
| 18 | Reheated food for hot holding | 165°F within 2 hours | Continue heating; no steam table reheating |
| 19 | Sanitizer strength at wiping stations, retest | As the label says | Remake |
| 20 | Buffet or display: guards in place, temperatures read | Hot 135°F or above; cold 41°F or below | See buffet food safety guidelines |
| 21 | Handwashing seen at least once: switching tasks, after touching face, after raw meat | Seen | Coach on the spot |
| 22 | Gloves used for ready-to-eat food, changed between tasks | Seen | Coach on the spot |
| 23 | Allergy tickets: marked, separate tools used | Yes | Stop, remake, tell the manager |
| 24 | Bathrooms: soap, towels, clean | Yes | Restock, clean |
The midday block is the one that goes missing on a busy day, which is why the readings for it can go on the line sheet where the cook already writes. The limits for each food type are in the food temperature chart, and the hot and cold holding detail is in hot holding temperature and cold holding temperature.
Closing checks (end of day)
| # | Check | Limit or test | Fix if it fails |
|---|---|---|---|
| 25 | Cooling: leftover hot food started cooling, probe at the start, at 2 hours and at 6 | 135°F to 70°F in 2 hours, then to 41°F in 4 more | Reheat to 165°F and restart in shallower pans, or discard |
| 26 | All prepared food covered, labeled and dated | Name, date made, use-by | Label now or discard |
| 27 | Food that was out all day (garnishes, sauces, cut produce) | Discard if held outside 41°F or 135°F beyond your time rule | Discard and write it down |
| 28 | Cold units closed and final reading | 41°F or below | Check door seals, call service if high |
| 29 | Equipment cleaned: slicer, cutting boards, prep surfaces, sinks, floor drains | Cleaned and sanitized | Finish before leaving |
| 30 | Dish machine emptied and cleaned | Per label | Finish before leaving |
| 31 | Trash out, bins washed, back door shut and sealed | Yes | Finish before leaving |
| 32 | Sign-off: closing manager signs, notes any open fix for the opening team | Signed | - |
Cooling is the closing line that most often goes wrong, because the cook who started it has gone home by the time stage 2 is due. Name a person for the 6-hour reading, or move the cooling to the afternoon, so someone is in the building. The cooling log has a filled-in example, and the restaurant cleaning log covers the cleaning lines in more detail.
A layout you can print
Put the three blocks on one landscape page, or one page per block. The head of the sheet:
Date: ____ Opening manager: ____ Midday lead: ____ Closing manager: ____
Under it, one row per check with these columns: #, Check, Limit, Reading or tick, Action if it failed, Initials. A filled row looks like this:
| # | Check | Limit | Reading | Action | Init. |
|---|---|---|---|---|---|
| 3 | Walk-in | 41°F or below | 44°F | Door was left ajar overnight. Closed it, moved dairy to the reach-in, recheck 8:30 = 39°F, dairy probed at 40°F. | JT |
| 9 | Date labels | Day 7 or less | 2 trays past date | Discarded, logged on waste sheet | JT |
| 15 | Hot holding, rice | 135°F or above | 128°F | Reheated to 170°F by 13:45, held | AL |
| 25 | Chicken stock at 15:00 | 70°F by 17:00 | 190°F, 68°F, 40°F | Three shallow pans and an ice bath | AL |
A busy kitchen can keep the daily sheet on a clipboard at the pass and a stack of the temperature sheets next to it. A kitchen that has moved to a phone can put the same lines into an app; see restaurant checklist apps and paper vs digital temperature logs before you pay for one, and restaurant temperature log apps if temperatures are the main part.
Who does what
- The opening person does lines 1 to 14. It should be the same person each day of the week, or a named alternate, so the checks do not depend on who arrives first.
- A line cook or lead does lines 15 to 18, and the manager looks over the sheet once during service.
- The closing manager does lines 25 to 32 and signs for the whole day, including any open fix.
- The owner or general manager reads the sheets once a week, looks for blanks and repeats, and signs the bottom of the weekly stack. This is the check that catches a pattern, such as the walk-in reading 44°F on Mondays.
Cooks are not the problem when a sheet goes blank. The usual causes are a sheet that is too long, a clipboard that is out of reach, a pen that is missing, or no one reading it. Fix those first. For staff who are new, add the sheet to the first-week training and keep a record, as in food safety training records.
What the sheet is not
A daily checklist is not a HACCP plan. The plan names your hazards, the points where you control them, the limit at each and the fix. The checklist is how you show every day that the plan is being followed. If you do not have a plan, the checklist will still catch many things, but an inspector may still ask for the plan. See the HACCP checklist for a restaurant and whether a restaurant needs a HACCP plan. It is also not an audit. An audit is a monthly look by someone who does not run the shift; see the restaurant food safety inspection checklist and the mock health inspection.
Shortening it for a small place
A food truck, a coffee shop or a ten-seat counter does not need 32 lines. Keep:
- Staff health, hand sink, sanitizer strength and the thermometer test (lines 1, 2, 6, 7).
- Every cold unit reading and a probe check of the cold food (3, 4, 16).
- Hot holding, if you hold hot food (15).
- Date labels (9, 26).
- Cooling, if you cool anything (25).
- Closing clean and sign-off (29, 32).
That is a dozen lines and takes about five minutes. Add the rest as you add menu items: a buffet adds the buffet line, raw fish adds a receiving line, sous vide adds its own sheet.
Common mistakes
- Filling in the whole sheet at 10 p.m., from memory, with perfect numbers.
- A "yes" tick on a line that needs a number.
- No limit on the sheet, so a cook writes 46°F and thinks it is fine.
- One sheet for the whole month with no space for the fix.
- A manager who signs without reading.
- No one reviews the sheets, so a missing line is never noticed.
- Keeping the sheets only in the office, where the cooks cannot see last week's numbers.
Questions
What should be on a daily food safety checklist?
Staff health, hand sinks, cold and hot holding temperatures, thermometer check, sanitizer strength, date labels, cooking and cooling temperatures, cleaning and a signature. Put the limit beside each line.
How often should a restaurant check food temperatures?
Cold units at opening and again midday or closing, hot holding at least every 2 hours during service, and cooling at the start, 2 hours and 6 hours. Your plan can set shorter gaps.
Does a daily checklist replace a HACCP log?
It can hold the same readings if it has a limit and a fix on each line. A plan with named control points still needs its own logs for those points.
Who should sign the checklist?
The person who did the checks, with a manager signing for the day. A signature that nobody read is not worth the ink.
How long do I keep daily checklists?
Often a year or more, depending on your health department. See how long to keep temperature logs.
Can I use a free template?
Yes, if it has limits and a fix on each line, and you edit it to your menu. A generic one without a limit column is a list, not a record. See free HACCP plan templates for what to look for.
To get the plan and the daily logs set up from your menu, see your plan.
Sources
- FDA Food Code 2022: employee health, handwashing, time and temperature control, date marking, cooling, cleaning and sanitizing. https://www.fda.gov/food/retail-food-protection/fda-food-code
- FDA, "HACCP Principles & Application Guidelines": monitoring, corrective action and record keeping. https://www.fda.gov/food/hazard-analysis-critical-control-point-haccp/haccp-principles-application-guidelines