Examples of HACCP logs: what each one looks like filled in
A HACCP log is a dated record that a control step happened and passed: a temperature, a time, who checked, and what you did if it failed. A restaurant usually keeps about ten kinds, and each one is a table with the same columns. Below is a filled-in example of every one, with its limit.
This page is for managers who want to see real rows before they print a sheet. To get the logs for your own menu, find your restaurant and see your plan, built from your menu.
Want these as a finished sheet for your kitchen? See your plan, built from your menu. No card.
What every HACCP log has in common
All the examples below share six columns. If a sheet is missing one, it is a list, not a record:
- Date and time the check was made.
- What was checked: the unit, the dish or the batch.
- The reading, as a number with its unit, next to the limit.
- Pass or fail, decided against the limit.
- Action taken if it failed, and the recheck.
- Initials of the person, plus a weekly manager sign-off.
The limits below come from the FDA Food Code [1]. Your state or county may set a different number, so replace them with your own where they differ. The general rules on what to keep and for how long are in HACCP record keeping.
Example 1: receiving log
When: at every delivery. Limit: cold food at 41°F or below; frozen food frozen hard. Live shellfish and eggs have their own limits [1].
| Date / time | Item | Supplier | Reading | Limit | Pass? | Action | By |
|---|---|---|---|---|---|---|---|
| 11/18 8:10 | Chicken thighs, case | Metro Foods | 38°F | ≤ 41°F | Yes | Stored in walk-in | MR |
| 11/18 8:14 | Cut melon, tub | Metro Foods | 47°F | ≤ 41°F | No | Rejected, credit slip | MR |
The names are made up for the example. See the receiving temperature log for the exceptions and how to reject a load.
Example 2: cold storage log
When: opening, mid-shift and close. Limit: 41°F or below in food; freezers at 0°F or colder as a target.
| Date / time | Unit | Reading | Limit | Pass? | Action | By |
|---|---|---|---|---|---|---|
| 11/18 7:30 | Walk-in | 38°F | ≤ 41°F | Yes | - | MR |
| 11/18 15:00 | Prep rail, top pan | 44°F | ≤ 41°F | No | Pan moved to reach-in, lid on, recheck 15:30 = 40°F | JT |
More in the refrigerator log, walk-in cooler log and freezer log.
Example 3: cooking log
When: for each batch or each high-risk item cooked to order, as your plan says. Limits: poultry 165°F, ground meat 155°F, whole cuts of beef, pork and fish 145°F [1].
| Date / time | Item | Core temp | Limit | Pass? | Action | By |
|---|---|---|---|---|---|---|
| 11/18 11:40 | Roast chicken, batch 2 | 171°F | ≥ 165°F | Yes | - | JT |
| 11/18 12:05 | Burger, ground beef | 148°F | ≥ 155°F | No | Back on the grill, rechecked at 158°F | JT |
See the chicken plan and the ground beef plan for the full set of steps around it.
Example 4: hot holding log
When: every 2 hours the food is held. Limit: 135°F or above in the Food Code; some states use 140°F [1].
| Date / time | Item / unit | Reading | Limit | Pass? | Action | By |
|---|---|---|---|---|---|---|
| 11/18 12:00 | Soup, well 2 | 152°F | ≥ 135°F | Yes | - | AL |
| 11/18 14:00 | Rice, well 3 | 128°F | ≥ 135°F | No | Reheated to 165°F, well turned up, rechecked 14:20 = 141°F | AL |
Why a steam table reads low is in hot holding temperature.
Example 5: cooling log
When: every batch of cooked food you cool for later. Limit: from 135°F to 70°F within 2 hours, then to 41°F within 4 more hours [1].
| Date | Item | Start (time / °F) | 2-hour (time / °F) | 6-hour (time / °F) | Method | Pass? | By |
|---|---|---|---|---|---|---|---|
| 11/18 | Beef chili, 2 pans | 15:00 / 150°F | 17:00 / 68°F | 21:00 / 40°F | Shallow pans, ice bath | Yes | MR |
Details and what to do on a miss are in the cooling log guide.
Example 6: reheating log
When: each batch of cooled food you bring back up for hot holding. Limit: 165°F, reached within 2 hours [1].
| Date / time | Item | Start | Reached 165°F at | Pass? | Action | By |
|---|---|---|---|---|---|---|
| 11/19 10:30 | Beef chili | 38°F | 11:05 / 168°F | Yes | To hot well | MR |
See the reheating log guide.
Example 7: thermometer calibration log
When: weekly for the line probe, and after any drop. Limit: 32°F in ice slush, within 2°F.
| Date | Thermometer | Ice-point reading | Pass? | Action | By |
|---|---|---|---|---|---|
| 11/18 | Line probe A | 33°F | Yes | - | MR |
| 11/18 | Receiving probe B | 36°F | No | Reset to 32°F; retested | MR |
See the calibration log guide and how to pick a restaurant thermometer.
Example 8: sanitizer concentration log
When: when you mix a fresh bucket and every 2 to 4 hours of use, per your plan. Limit: the range on the product label, tested with the strip made for that chemical. Chlorine is commonly 50 to 100 ppm and quaternary ammonium 200 to 400 ppm, but read the label.
| Date / time | Station | Sanitizer | Strip reading | Range | Pass? | Action | By |
|---|---|---|---|---|---|---|---|
| 11/18 9:00 | Line bucket | Quat | 300 ppm | 200-400 | Yes | - | AL |
| 11/18 13:00 | Prep bucket | Quat | 100 ppm | 200-400 | No | Dumped, remixed, retested 300 | JT |
See the sanitizer log guide.
Example 9: cleaning and pest logs
These are checklists, not temperature sheets. A cleaning log lists the task, how often, the day it was done and who did it. A pest log records the weekly walk, anything seen and what you did.
| Date | Task / area | Frequency | Done | Finding / action | By |
|---|---|---|---|---|---|
| 11/18 | Ice machine, wipe and sanitize | Weekly | Yes | - | AL |
| 11/18 | Back door, droppings check | Weekly | Yes | Droppings found under shelf; vendor called | MR |
See the cleaning log and the pest control log.
Example 10: corrective action log
When a reading fails, the row on the log says what you did. A separate corrective action log is useful for the bigger events: a cooler down overnight, a recalled product, a failed cooling.
| Date | What happened | Food affected | Decision | Cause fixed by | Signed |
|---|---|---|---|---|---|
| 11/17 | Walk-in read 49°F at open; compressor tripped | Dairy, cut produce | Discarded, cannot prove under 4 hours | Repair visit 11/17, unit at 38°F by 15:00 | MR |
The order the logs run in during one day
- Opening: cold storage readings; calibration check on the line probe if it is the weekly day; sanitizer bucket mixed and tested.
- Delivery window: receiving log for each drop.
- Service: cooking log for the high-risk items; hot holding every 2 hours; cold prep rail mid-shift.
- Afternoon: cooling log started for anything cooked for tomorrow; reheating log for what comes out of the walk-in.
- Close: cold storage again; cleaning log; dish machine check; manager reads the sheets and initials them.
- Weekly: pest walk, calibration, a photo of every sheet to a dated folder, a read-through of all corrective actions.
Which log do you need first?
Match the log to what your inspector wrote up. Cold holding and hot holding are the two most cited temperature items in many city inspection lists, so cold storage and hot holding sheets come first. If you cool soups, stocks or rice, the cooling log comes next, because it is the one with the most time pressure. The 12 most cited violations page shows which limit sits behind each one.
Mistakes that make a log fail at inspection
- The same number every day. 38°F, 38°F, 38°F for a month looks filled in from memory.
- A failed reading with no action. It reads as a problem you saw and ignored.
- Tick boxes with no number. A tick records that someone looked, not what they found.
- Whiteout. Cross out with one line and initial, so the original stays readable.
- No manager review. The sign-off is what shows someone checked the checker.
- Logs for steps your menu does not have. A sushi rice sheet in a burger place makes the real ones harder to find.
Paper or app?
Both work if they hold the same six columns. Paper is free and passes an inspection when it is legible and kept. An app adds reminders and time stamps. See paper vs digital temperature logs, or put the whole set in one binder as in the food safety log book guide.
Questions
What is an example of a HACCP log?
A hot holding log: date and time, the dish, the reading in °F, the limit (135°F or above), pass or fail, the action taken and initials. Each example above follows the same pattern.
How many HACCP logs does a restaurant need?
It depends on your menu. Most restaurants run receiving, cold storage, cooking, hot holding, cooling, reheating, calibration and sanitizer logs, plus cleaning and pest checklists. A place with no cooling step does not need a cooling log.
Can I use a spreadsheet for HACCP logs?
Yes, if it holds the six columns and you keep it for the period your health department sets. Save a copy so edits are traceable.
Who should fill in the logs?
The person who takes the reading, at the moment they take it. A manager reviews and signs weekly.
How long do I keep them?
Many jurisdictions ask for 90 days to a year or more; some HACCP rules say two years. Ask your health department and see HACCP record keeping.
Are these the same as the logs a HACCP plan lists?
Yes. The plan names the step, the limit and the record; the log is where you write it each day. See the HACCP plan example for a restaurant.
If you want the sheets for the items on your menu, see your plan, built from your menu.
Sources
- FDA Food Code 2022: cooking, holding, cooling and reheating temperatures; receiving. https://www.fda.gov/food/retail-food-protection/fda-food-code
- FDA, Hazard Analysis and Critical Control Point (HACCP): records and verification. https://www.fda.gov/food/guidance-regulation-food-and-dietary-supplements/hazard-analysis-critical-control-point-haccp
See also: restaurant temperature log sheet, HACCP checklist for a restaurant.
See also: HACCP corrective action log.