Food temperature chart for a restaurant: the limits on one page
A restaurant food temperature chart has six numbers that matter: cold food at 41°F or below, hot food at 135°F or above, cooking at 145°F, 155°F or 165°F by food, cooling from 135°F to 70°F in 2 hours and then to 41°F in 4 more, and reheating to 165°F. Copy the table below, tape it by the line and the walk-in, and use it as the "limit" column on your logs.
This guide is for restaurant owners, managers and cooks who want one reference page for the shift. It gives the full chart, what each row means in practice, what to do when a reading misses, and how to turn the chart into a log you fill in. The numbers are from the FDA Food Code; your county may use an older or stricter version, so check it before you print [1]. To get the chart set up as logs for your own menu, see your plan.
Want these limits as logs for your menu? See the plan and logs built from your menu. No card.
The chart
| Step | Food | Limit | Notes |
|---|---|---|---|
| Receiving, cold | Meat, fish, dairy, cut produce | 41°F or below | Eggs: 45°F air or below. Live shellfish have their own rule. |
| Receiving, frozen | Frozen food | Frozen solid | Reject if thawed, wet cartons, ice crystals that look refrozen. |
| Cold holding | Any food that needs time and temperature control | 41°F or below | Walk-ins, reach-ins, prep rails. |
| Hot holding | Cooked food held for service | 135°F or above | Some states set 140°F. Check yours. |
| Cooking, poultry | Chicken, turkey, duck, stuffed foods | 165°F | Hold briefly at the limit, as the Food Code says. |
| Cooking, ground meat | Burgers, sausage, ground fish | 155°F | Grinding mixes the surface into the middle. |
| Cooking, whole cuts | Beef, pork, fish, lamb steaks and chops | 145°F | Eggs cooked for immediate service also 145°F. |
| Cooking, plant foods | Fruits, vegetables, beans for hot holding | 135°F | Raw plant foods have no cook limit. |
| Cooling, stage 1 | Cooked food | 135°F to 70°F within 2 hours | The fastest drop is in the first hour. |
| Cooling, stage 2 | Cooked food | 70°F to 41°F within the next 4 hours | 6 hours in total. |
| Reheating | Cooled food for hot holding | 165°F within 2 hours | Do not use a steam table to reheat. |
| Date marking | Ready-to-eat food held cold | Use within 7 days at 41°F or below | Day 1 is the day it was made or opened. |
| Danger zone | Any food that needs control | 41°F to 135°F | Germs grow fastest here. Time in this range is counted. |
Those are the figures in the Food Code that most health departments base their rules on [1]. A few states and counties change them: some require 140°F hot holding, some have a shorter date-marking period, some add limits for specific foods. Ask your health department for the version it enforces and mark the differences on your own copy.
What each row means on the line
Cold: 41°F or below
Cold means the food, not the air. A walk-in can read 38°F on the wall while the top pan on the prep rail sits at 46°F, because the lid is open and the cold air does not reach it. Check the food with a probe, in the top pan, at the front and back. The full guide is cold holding temperature, and the unit side is in the walk-in cooler temperature log.
Hot: 135°F or above
The steam table is for holding food that is already hot, not for heating it. Start at or above 135°F and check at least every two hours, with the probe in the food, not the water around it. See hot holding temperature.
Cooking: three numbers
Poultry 165°F, ground meat 155°F, whole cuts 145°F. Probe the thickest part, away from bone. Thin foods such as burger patties need a thin probe pushed in from the side. The numbers refer to a brief hold at the limit, and some counties set the hold time; your plan should say which [1].
Cooling: 2 hours, then 4
This is the rule cooks break most often. A pot of soup in the walk-in with its lid on can stay in the danger zone for many hours, because the middle cannot give off heat. Split large batches into shallow pans, use an ice bath, stir with an ice wand, and time each stage. Start the clock the moment the food leaves the heat. A filled-in sheet is in the cooling log guide.
Reheating: 165°F within two hours
Food cooked, cooled and brought back for hot holding must reach 165°F inside two hours [1]. A microwave, oven or stovetop does it; a steam table does not. See the reheating temperature log.
Receiving: check before you put away
Take a probe to the middle of a case of chicken or fish, or between two packs. A delivery driver who is in a hurry is a reason to check, not a reason to skip it. See the receiving log.
The danger zone, in plain words
The danger zone is 41°F to 135°F. Between those numbers, germs that cause food poisoning can grow, and USDA says some can double in number in as little as 20 minutes. Food that spends too long in the zone has to be thrown out, because cooking again does not remove the toxins some germs leave behind. The Food Code limits how long a food may stay in the zone before service: if you track time as a control instead of temperature, you generally have 4 hours, and must discard after that [1]. That is a special method with its own written procedure, so check with your health department before you use it.
What to do when a reading misses
A chart is only useful if the cook knows the next step. Print this under the chart:
| If this happens | Do this | Write on the log |
|---|---|---|
| Cold food reads 42 to 45°F | Check the unit. Move the food to a cold unit. Recheck in 30 minutes. If you know how long it was above 41°F and it was under 4 hours in total, chill and use. Otherwise discard. | Reading, time, action, recheck, initials |
| Cold food has been above 41°F for an unknown time | Discard. | Item, amount discarded, reason |
| Hot food reads under 135°F | Reheat to 165°F within 2 hours, then hold again. If you do not know how long it was low, discard. | Reading, time, action, initials |
| Chicken reads under 165°F | Keep cooking. Recheck. | Reading after, time |
| Cooling missed stage 1 (still above 70°F at 2 hours) | Reheat to 165°F and start the cooling again, with shallower pans, or discard. | Both readings, the new method |
| Delivery above 41°F | Reject, or accept and tell your manager if your plan allows a short recheck. | Reading, item, supplier, action |
The fix is the same each time: the reading, what you did, and who did it. The rows on your log for that are the "corrective action" column; see the corrective action log for filled examples. Where a number sits just outside a limit, the standard is the limit, not "close enough".
Turning the chart into a log
A chart on a wall tells people the limit. A log proves they checked. The simplest log has these columns: date, time, unit or item, reading, limit, OK or not, action, initials. Fill in the limit column from the chart so no one has to remember it. A day's sheet might look like this:
| Time | Unit or item | Reading | Limit | OK? | Action | Init. |
|---|---|---|---|---|---|---|
| 8:00 | Walk-in | 38°F | 41°F or below | Yes | AL | |
| 8:05 | Prep rail, sliced tomato | 40°F | 41°F or below | Yes | AL | |
| 11:15 | Steam table, chili | 152°F | 135°F or above | Yes | JT | |
| 13:30 | Steam table, rice | 128°F | 135°F or above | No | Reheated to 170°F, held again, 13:45 | JT |
| 15:00 | Chicken stock, start cooling | 190°F | to 70°F by 17:00 | - | Split to 3 shallow pans, ice bath | AL |
| 16:40 | Chicken stock, stage 1 | 68°F | 70°F or below | Yes | AL | |
| 20:55 | Chicken stock, stage 2 | 40°F | 41°F or below by 21:00 | Yes | AL |
More layouts, including ready-to-print sheets, are in the restaurant temperature log sheet and examples of HACCP logs. If a paper sheet is not working, see paper vs digital temperature logs.
Where to put the chart
- By the line, at eye height, so the cook looking at the steam table sees the hot-holding limit.
- Inside the walk-in door, with the cold limit and the date-marking rule.
- At receiving, with the cold and frozen rules and the rejection steps.
- In the binder, next to the plan, so an inspector sees that your limits match the code.
Laminate it, or keep it in a wipeable sleeve; paper on a wet wall does not last a week. Re-check it once a year, and whenever your health department adopts a new code. The page is also a training tool: ask a new cook to point at the row that applies to the dish they are making, as part of the first-week checklist in food safety training records.
Limits that are not on the chart
A few controls affect food safety but do not fit a temperature column:
- Thawing. In the fridge at 41°F or below, under cold running water at 70°F or below, in the microwave if you cook right away, or as part of cooking [1].
- Hot water. Handwash sinks and dish machines have limits set by the code and the machine's label. See the dishwasher temperature log.
- Sanitizer strength. A parts-per-million reading, not a temperature. See the sanitizer concentration log.
- Specialty processes. Sous vide, curing, smoking and vacuum packing have their own limits and need a written plan. See the sous vide plan.
Common mistakes with a temperature chart
- Taping up a chart that has the wrong state's numbers. Read your county's rule, then print.
- Having the chart and no log, so nothing shows the checks were done.
- Logging air temperature when the limit is on the food.
- Recording numbers in a block at the end of the shift from memory, with perfectly round values.
- Leaving the action column blank when a reading missed.
- Printing a chart in Celsius for a crew that works in Fahrenheit, or the other way round.
Questions
What is the safe temperature range for food in a restaurant?
Keep cold food at 41°F or below and hot food at 135°F or above. The range between is the danger zone.
What temperature should a restaurant fridge be?
41°F or below for the food inside. Many kitchens set the unit to 36 to 38°F, so a door opening does not push food over the limit.
What is the cooking temperature for chicken in a restaurant?
165°F in the thickest part. Ground chicken follows the poultry limit, not the ground beef limit.
Do I have to keep the chart for the inspector?
The chart is a training aid. What an inspector asks for is the written plan and the logs. See how long to keep temperature logs.
Is hot holding 135°F or 140°F?
The FDA Food Code says 135°F, and some states and counties set 140°F. Print the number your health department enforces.
Can I use this chart as my HACCP plan?
No. A chart lists limits. A plan names your hazards, the steps where you control them and what you do when a limit is missed. See the HACCP plan for a restaurant.
To turn these limits into the plan and logs for your own menu, see your plan.
Sources
- FDA Food Code 2022: time and temperature control for safety food, cooking, cooling, reheating, receiving and date marking (chapters 3-2, 3-4, 3-5). https://www.fda.gov/food/retail-food-protection/fda-food-code
- USDA FSIS, Danger Zone (40°F to 140°F) and the two-hour rule. https://www.fsis.usda.gov/food-safety/safe-food-handling-and-preparation/food-safety-basics/danger-zone-40f-140f