HACCP flow diagram example for a restaurant: how to draw one step by step
A HACCP flow diagram is a simple chart of every step a food takes in your kitchen, from the delivery door to the plate. You draw one box per step, join them with arrows, and mark the steps where a hazard must be controlled. A restaurant can draw one on a single page in about an hour, and the example below shows exactly how.
This guide is for owners and chefs who are writing a HACCP plan and got stuck on step four of the usual list, "construct a flow diagram". We show a filled HACCP flow diagram example, the boxes to include, how to group menu items so you do not draw 80 charts, and the mistakes inspectors and consultants see most.
Want this filled in for your menu? See your plan, built from your menu. No card, free first log.
What a HACCP flow diagram is, and why the plan asks for it
The flow diagram is the map your hazard analysis follows. Before you can say where a germ can get in or grow, you have to list where the food goes. The FDA and Codex both put the flow diagram right before the hazard analysis for this reason: you cannot analyze a step you never wrote down [1][2].
It does three jobs. First, it makes you walk the real path, not the path in the manual. Second, it gives each step a number so the hazard table and the logs can point back to it ("Step 7: cooling"). Third, it shows an inspector or a new manager how your kitchen works in 30 seconds.
It is not a floor plan and it is not a recipe. It shows what happens to the food, in order. Keep each box to a few words.
The standard boxes for a restaurant
Most restaurant kitchens share the same backbone. Start with this list and cross out what you never do.
- Receiving. Delivery arrives; you check temperature, packaging and dates.
- Cold storage. Walk-in or reach-in at 41°F (5°C) or below.
- Frozen storage. Freezer, if you keep frozen items.
- Dry storage. Shelf-stable items, off the floor.
- Thawing. In the cooler, under cold running water, or as part of cooking.
- Preparation. Cutting, mixing, assembling. Time out of temperature control starts here.
- Cooking. To the minimum internal temperature for that food.
- Hot holding. At 135°F (57°C) or above.
- Cooling. Cooked food that will be used later.
- Cold holding. Salad bar, prep line, display at 41°F or below.
- Reheating. Cooled food brought back up to 165°F (74°C).
- Serving. Plating, buffet, takeout or delivery.
The temperature numbers come from the FDA Food Code. Your state or county may adopt a different edition, so check your local rules [1].
HACCP flow diagram example: a chicken dish served hot
Here is a worked HACCP flow diagram example for grilled chicken served the same day. Read it top to bottom. An arrow means "then".
| Step | Box | What happens | Control point? |
|---|---|---|---|
| 1 | Receive raw chicken | Check it is 41°F or below, packaging is sealed, date is good | Yes: temperature at receiving |
| 2 | Store in walk-in | Bottom shelf, below ready-to-eat food | Yes: cold storage and separation |
| 3 | Prep | Trim, season, on a red board | Cross-contact, time out of control |
| 4 | Grill | Cook to 165°F (74°C) for 15 seconds | Yes: cook step |
| 5 | Hot hold | Keep at 135°F or above | Yes: hot holding |
| 6 | Plate and serve | Clean hands, clean utensils | Handling |
Drawn as boxes: Receive → Store → Prep → Grill → Hot hold → Serve. The "Control point?" column is not part of the diagram itself. We add it here so you can see how the diagram feeds the hazard analysis in the next step. See our HACCP critical control points examples for which steps usually become critical.
A second example: a dish that is cooked, cooled and reheated
Soups, sauces, rice, braised meats and chili follow a longer path, and the long path is where most mistakes happen. The extra boxes are cooling and reheating.
Receive → Store → Prep → Cook → Cool → Cold hold overnight → Reheat → Hot hold → Serve
Under the FDA Food Code, cooked food that is cooled must fall from 135°F to 70°F within 2 hours, and from 70°F to 41°F within a further 4 hours [1]. That is why "Cool" is its own box with its own log. Our cooling log guide shows the readings to write down, and the reheating log guide covers the 165°F step.
How many diagrams does a restaurant need?
Not one per menu item. Group dishes that follow the same path. Most restaurants end up with three to six diagrams:
- No-cook items: salads, cold sandwiches, fruit cups. Receive, store, prep, cold hold, serve.
- Cooked and served right away: burgers, grilled chicken, eggs. Receive, store, prep, cook, serve.
- Cooked, held hot: steam table, rice, fried items.
- Cooked, cooled, reheated: soups, sauces, stocks, chili, large roasts.
- Special processes: sous vide, vacuum sealing, curing, raw oysters. These get their own diagram because they add hazards. See sous vide HACCP plan and HACCP plan for vacuum sealing.
The FDA's retail guidance accepts grouping foods by process, rather than writing a separate plan for each dish, when the steps and hazards are the same [3].
How to draw yours in one hour
- Print your menu. Circle each dish. Write a letter beside the group it belongs to (A for no-cook, B for cook-and-serve, and so on).
- Walk the path with a cook. Start at the back door and follow one item from group B all the way to the pass. Ask "then what?" at each stop and write the answer on a sticky note.
- Put one step on each note. One verb, one place: "Thaw in walk-in", not "thaw and prep".
- Line up the notes and number them. Move any that are out of order. Do not skip steps that feel boring; thawing and holding are where trouble starts.
- Add side paths. If a dish can be held and then reheated, show it as a branch. If leftovers go back to the walk-in, show that arrow too.
- Mark the control points. Put a star on the steps where a hazard has to be controlled to make the food safe: cook, cool, hot hold, cold hold, receiving. Your hazard analysis will confirm these.
- Check it on the floor. Walk the line during service with the diagram in hand. Fix anything that does not match what really happens. The FDA calls this on-site confirmation of the flow diagram [2].
Tools: paper, a spreadsheet or a drawing app
A diagram can be made in any of these and none is better in the eyes of an inspector. What matters is that it is clear, dated and matches the kitchen.
- Paper and a ruler. Fastest for one kitchen. Photograph it and keep the photo with the plan.
- A spreadsheet. One row per step, with the step number, the name and the next step. Easy to sort and edit. It is a "flow table" rather than a picture, and it is fine.
- A free drawing app. Boxes and arrows are the whole job. Do not spend time on colors.
If you would rather not draw, we can build the diagram from your menu with the plan. You can see your plan first; it takes about two minutes, with no card.
What an inspector or consultant looks for
- Every step is there. Thawing, cooling and reheating are the ones most often left out.
- It matches the menu. A new dish that follows a new path needs a new diagram or a new branch.
- Steps are numbered and the same numbers show up in the hazard table and the logs.
- It has a date and a name. Who checked it and when, with a review date at least once a year or when the menu changes [2].
- It is not a copy. A diagram from a template for a different kind of place will have boxes you never use and miss ones you do.
Common mistakes
- Drawing the ideal kitchen. If the line cooks thaw chicken on the counter, that belongs in the diagram, and then you fix the practice.
- Too much detail. A 40-box chart no one reads is worse than a 7-box chart on the wall.
- One giant chart for everything. It becomes a spider web. Group by process.
- Forgetting storage between steps. Food waits between prep and cook; waiting is where time and temperature add up.
- No link to the logs. Each control point on the diagram should have a log with its limit. See our examples of HACCP logs.
From diagram to hazard analysis and logs
Once the diagram is done, you go step by step and ask: what could go wrong here (biological, chemical, physical), and what keeps it in check? That table is the HACCP hazard analysis worksheet. The steps that need a measured limit become control points, each with a monitoring record, which is what the HACCP monitoring procedures example shows. For the whole plan around it, read HACCP plan for a restaurant and the HACCP plan format.
FAQ
What is a HACCP flow diagram?
A chart of each step a food goes through in your operation, in order, from receiving to serving. It is the base for the hazard analysis.
Do I need a flow diagram if I only have a food safety plan, not a full HACCP plan?
Most restaurants do not need a full HACCP plan for ordinary menus, but a simple flow of steps is still the best way to find where your temperature logs belong. Special processes like sous vide, curing and vacuum packing may need a full plan under local rules.
Is there a HACCP flow diagram template I can copy?
You can use the boxes above as a template. Remove the steps you do not do, add ones you do, and check it against your own kitchen. A template from another business is only a starting point.
How detailed should the boxes be?
One step per box, a few words each. Put the limits (temperatures, times) in the hazard table, not in the diagram.
How often should I update it?
When you add a dish with a new path, change equipment or a supplier process, and at least once a year as a review.
Who should draw it?
Someone who knows the line, ideally with a cook. The FDA expects the plan team to confirm the diagram in the kitchen [2].
Want the diagram, the hazard table and the logs built from your own menu? See your plan and print the first log free.
Sources
- FDA Food Code 2022: temperature limits and cooling times. https://www.fda.gov/food/retail-food-protection/fda-food-code
- FDA, "HACCP Principles & Application Guidelines" (describe the product, construct and confirm a flow diagram, hazard analysis). https://www.fda.gov/food/hazard-analysis-critical-control-point-haccp/haccp-principles-application-guidelines
- FDA, Managing Food Safety: A Manual for the Voluntary Use of HACCP Principles for Operators of Food Service and Retail Establishments (grouping foods by process). https://www.fda.gov/food/retail-food-protection/managing-food-safety-haccp-principles-operators-food-service-and-retail-establishments