HACCP hazard analysis worksheet: a filled example for a restaurant
A HACCP hazard analysis worksheet is a table with one row for each step of your food flow. For each step you list what could make someone sick (germs, chemicals, hard objects), say how likely and how serious it is, and write what you do to control it. The steps where a measured limit is needed become your critical control points.
This guide is for restaurant owners and chefs who need to fill in a hazard analysis and want to see real rows first. We show the columns, a filled HACCP hazard analysis worksheet for five common steps, how to decide what is significant, and the mistakes that make a worksheet useless to an inspector.
Want this filled in for your menu? See your plan, built from your menu. No card, free first log.
What the worksheet is for
The hazard analysis is the second principle in the Codex and FDA HACCP method, and the one the other principles depend on [1][2]. You cannot choose critical control points until you know which hazards are real at which step. The worksheet is where that thinking is written down so another person can check it.
It follows your HACCP flow diagram: one row per box, with the same step number. If your diagram says "Step 4: cook chicken", row 4 of the worksheet is about cooking chicken.
The three kinds of hazard
- Biological: bacteria such as Salmonella, Listeria and E. coli, viruses such as norovirus, and parasites. These cause most restaurant illness and are controlled mainly by temperature, time and hand and surface hygiene [3].
- Chemical: cleaning and sanitizing chemicals, allergens, toxins such as scombrotoxin (histamine) in some fish. Controlled by storage, labels and sourcing.
- Physical: glass, metal, bone, plastic. Controlled by inspection, equipment care and sourcing.
Allergens are listed with chemical hazards in many worksheets. If you prefer, add a fourth column for them, because the nine major allergens need their own controls in a restaurant.
The columns, and what goes in each
| Column | What you write |
|---|---|
| 1. Step | The number and name from your flow diagram |
| 2. Hazard | Biological, chemical or physical, and the specific one ("Salmonella survives") |
| 3. Significant? | Yes or no, based on how likely and how serious it is |
| 4. Why | One line of reasoning ("raw poultry often carries Salmonella") |
| 5. Control measure | What you do to prevent or reduce it |
| 6. Control point? | Is this step critical (a CCP), or handled by a prerequisite program? |
The "Why" column is the one people skip, and the one an inspector reads first. A "no" with a reason is a good answer; a blank is not.
HACCP hazard analysis worksheet example: grilled chicken
Here is a filled HACCP hazard analysis worksheet for the grilled chicken path from our flow diagram. This is an example to learn from, not your plan. Your menu, suppliers and equipment will change the answers.
| Step | Hazard | Significant? | Why | Control | CCP? |
|---|---|---|---|---|---|
| 1. Receive raw chicken | Biological: bacteria grow if delivered warm | Yes | Raw poultry is a known source of Salmonella and Campylobacter; warm delivery lets numbers rise | Check 41°F (5°C) or below; reject if above; approved supplier | Yes (CCP 1) |
| 2. Cold storage | Biological: growth; cross-contamination onto ready-to-eat food | Yes | Drips from raw poultry reach food that is not cooked again | Cooler at 41°F or below; raw on the bottom shelf; covered | Prerequisite plus temperature log |
| 3. Prep | Biological: cross-contact on boards and hands. Chemical: allergen in marinade | Yes | Boards and hands move germs; marinades may contain soy, wheat or other allergens | Red board; wash hands and sanitize after raw; allergen labels | Prerequisite |
| 4. Grill | Biological: Salmonella survives if undercooked | Yes | Cooking is the step that kills it | Cook to 165°F (74°C) for 15 seconds, probe thickest part | Yes (CCP 2) |
| 5. Hot hold | Biological: growth, and toxin from spore formers | Yes | Cooked food between 41°F and 135°F lets bacteria grow | Hold at 135°F (57°C) or above; check every 2 hours; discard if below limit for longer than the rule allows | Yes (CCP 3) |
| 6. Serve | Physical: a bone fragment or a glove piece | No | Rare; found by the cook and the server on plating | Visual check; training | No |
The temperatures come from the FDA Food Code [3]. Your state or county may use a different edition, so check your local code before you copy a limit.
How to decide if a hazard is significant
The FDA method asks two questions about each hazard: how likely is it to happen at this step, and how bad is it if it does? If both are high enough that a careful cook would worry, it is significant [2].
- Use what is known. Raw poultry and eggs with Salmonella, raw ground beef with E. coli, ready-to-eat deli food with Listeria. The FDA's Food Code and the CDC list the common causes [3].
- Use your own history. Failed inspection items, a customer complaint, a log showing a cooler that drifts. Real events count.
- Ask if a later step removes it. Salmonella on raw chicken is removed by cooking, so it is controlled at the cook step. But Salmonella on a lettuce leaf is not, because no cook step comes after.
- Write the reason either way. A "no" needs a reason as much as a "yes".
From significant hazard to critical control point
Not every significant hazard becomes a CCP. A step is a CCP when it is the last practical point to prevent, remove or cut the hazard to a safe level, and you can measure it with a limit. Cooking to 165°F is one. Handwashing is vital, but it is handled by a prerequisite program with a checklist, not a measured limit.
A short test: "If this step fails, is there a later step that fixes it?" If not, and you can measure it, it is a CCP. Our HACCP critical control points examples list the usual ones: receiving, cooking, cooling, hot holding, cold holding, and reheating.
Other rows most restaurants need
- Cooling: Biological: spore-formers (Clostridium perfringens, Bacillus cereus) grow in slowly cooling food. Control: 135°F to 70°F within 2 hours and to 41°F within 4 more hours [3]. See cooling log for a restaurant.
- Reheating: Biological: bacteria that grew while cooling. Control: reheat to 165°F within 2 hours [3].
- Thawing: Biological: growth on the outside while the inside is frozen. Control: in the cooler, under cold running water, or as part of cooking.
- Dishwashing: Chemical and biological: sanitizer too weak, water too cool. Control: machine temperature and sanitizer strength checks. See dishwasher temperature log and sanitizer concentration log.
- Allergens: Chemical: cross-contact or a mislabeled item. Control: separate tools, labels, a clear process for special orders.
Mistakes that make a worksheet fail
- Copying a template without changing it. A hazard table for a plant making canned soup does not fit a taqueria.
- "All hazards significant, all steps CCPs". If everything is critical, nothing is. A kitchen with 15 CCPs will not watch them.
- Naming hazards only as "bacteria". Say which: Salmonella, Listeria, norovirus. The control follows from the organism.
- Skipping the "why". The worksheet is a record of your reasoning.
- Not updating it. A new menu item with a new step needs a new row. Review at least yearly [2].
Where the worksheet sits in the plan
The order is: description of the food and who eats it, flow diagram, hazard analysis (this worksheet), critical control points, critical limits, monitoring, corrective actions, verification and records. See the HACCP plan format for the sections in order, and HACCP plan example for a restaurant for a full filled plan. Once you have chosen CCPs, each needs a monitoring rule, shown in the HACCP monitoring procedures example, and a response for when a limit is missed, shown in the HACCP corrective action log.
If you want the worksheet filled in from your actual menu, see your plan. It takes about two minutes and you can print a free log first.
FAQ
What is a hazard analysis worksheet in HACCP?
A table that lists, for each food step, the hazards that could cause illness, whether they are significant, and how each is controlled.
Is there a free HACCP hazard analysis worksheet I can download?
Several agencies publish blank forms. The columns above match the usual layout. Fill it with your own steps and reasons; a blank form from another operation will not fit your kitchen.
How many hazards should I list per step?
Only those that are reasonably likely. One to three per step is usual. Do not list every germ you can name.
Who should fill it in?
The owner or chef with someone who runs the line. The FDA expects a team that knows the food and the process [2].
Do I need a hazard analysis for every dish?
No. Group dishes by process, as in the flow diagram, and do one analysis per group.
What is the difference between a hazard analysis and a risk assessment?
In HACCP they are close. The hazard analysis lists the hazards and rates them by likelihood and severity to pick the ones to control.
Want the worksheet, the limits and the logs made for your menu? See your plan, no card.
Sources
- Codex Alimentarius, General Principles of Food Hygiene, HACCP annex. https://www.fao.org/fao-who-codexalimentarius/
- FDA, "HACCP Principles & Application Guidelines". https://www.fda.gov/food/hazard-analysis-critical-control-point-haccp/haccp-principles-application-guidelines
- FDA Food Code 2022. https://www.fda.gov/food/retail-food-protection/fda-food-code