Mock health inspection: how to run one, who can do it, and what to fix
A mock health inspection is a practice inspection: someone walks your kitchen with the same checklist an inspector uses, writes down what they find, and you fix it before the real visit. You can run one yourself in about an hour, hire a food safety firm to do it, or ask your health department if it offers a free consultation visit.
This guide is for restaurant owners and kitchen managers who want to know what a mock inspection is, which route fits their budget, and what to do with the list afterward. It gives a 60-minute walk in the order inspectors tend to work, a score sheet, and a table that compares the three routes. If you want your plan and logs built from your menu first, find your restaurant and see your plan.
Got cited for a temperature? See the log sheet built for that item. No card.
What a mock health inspection is
A real inspection is done by a health department inspector. It can be a routine visit, a follow-up after a bad one, or a visit because someone complained. A mock inspection copies that visit with nothing at stake. Nothing is posted, no grade changes, and no fine is written. The only output is a list of things to fix.
The idea is simple: the kitchen you see every day is not the kitchen an outsider sees. A person who has never worked your line will spot the sanitizer bucket without a test strip, the thermometer that has not been checked, or the box of chicken sitting above the salad. Those are the things inspectors write up. The FDA's long-running studies of restaurants group the most common causes of foodborne illness into five risk factors: food held at the wrong temperature, food not cooked enough, dirty or contaminated equipment, food from unsafe sources, and poor personal hygiene [1]. A good mock inspection puts most of its time on those five.
Three ways to get one: compare them
| Do it yourself | Hire a food safety firm | Health department visit | |
|---|---|---|---|
| Cost | An hour of a manager's time | A fee; firms set their own prices, so ask for one in writing | Often free where offered; many departments do not offer it |
| Who looks | You or a manager, ideally from a different shift or a sister location | A person trained to inspect, often a former inspector | An inspector, in a visit that is meant to teach |
| Strength | Cheap, can be done monthly | Fresh eyes and a written report | Closest to the real rules for your area |
| Weakness | You know where things are "supposed" to be, so you miss gaps | The firm may score against a private standard, not your local code | May not be offered; may be slow to book |
| Best for | Monthly checks, a first pass | Before a big event, a sale or a franchise audit | After a bad result, or when opening |
Do not assume the health department route exists. Some counties publish a plain "consultation" or "pre-opening" visit; others only inspect. Call the office, ask "do you offer a non-scored visit for an existing restaurant?" and write down the answer and the date. If they do not, use one of the other two routes.
Before you start: set the rules for the walk
- Use your own area's form. Most health departments post their inspection form or a self-inspection sheet on their website. Search your county name plus "restaurant inspection form". The state and city may use different point values for the same item, which is why we link the form rather than invent one. For how scores work in two big cities, see restaurant health inspection grades.
- Pick the right person. Not the chef who set up the line. A manager from another shift works. So does a sister-location manager. Give them permission to write down anything.
- Do it in service hours at least once. Real inspectors come when you are busy. A walk at 7 a.m. shows an empty kitchen. A walk at 1 p.m. shows hot holding, handwashing, and the cooler door left open.
- Bring a thermometer and test strips. The walker should use a thermometer that has been checked in ice water (it should read 32°F) and the same sanitizer strips your staff use [2].
- Say it is a practice, out loud. Staff behave differently under a clipboard. Tell them it is a drill and that the goal is a list of fixes, not blame.
The 60-minute walk, in order
Inspectors do not wander. They start where the risk is highest. Use the same order so your list is in priority order too.
Minutes 0–5: the person in charge
Ask the manager on duty: "Who is the person in charge right now, and what do you do if a cooler reads 48°F?" The Food Code expects a person in charge who can show food safety knowledge [2]. Check the answer against your written plan. If the answer is "call the owner", write that down as a finding. A good answer names a limit (41°F), a time, and a record.
Minutes 5–15: hands, sinks and sick staff
- Is there a handwashing sink at each station, with soap, paper towels and warm water? Is anything stored in it?
- Does anyone wear jewelry on the hands, an open drink at the prep table, or bare-hand contact with ready-to-eat food?
- Is there a written rule that staff with vomiting, diarrhea or a fever stay home, and does staff know it?
Minutes 15–30: temperatures, the biggest part
- Cold units. Read the air temperature and probe a sample of food in each. Cold food should be 41°F or below [2]. Open the refrigerator log and the walk-in log and check that today has a reading, in ink, with initials.
- Hot holding. Probe food on the steam table or in the holding cabinet. Hot food should be 135°F or above. See hot holding temperature.
- Cooling. Ask what is cooling right now. Look for pans stacked in a walk-in. Cooked food should go from 135°F to 70°F within two hours, and then to 41°F within four more [2]. See the cooling log.
- Cooking and reheating. Ask what was cooked today and what temperature it reached. Poultry needs 165°F; leftovers reheated for hot holding need 165°F within two hours [2]. See the reheating log.
- Time as a control. If any food is out on a time limit instead of temperature, look for a written procedure and a label showing when it must be thrown away.
Minutes 30–40: storage and cross-contamination
- Is raw meat below ready-to-eat food, and are raw foods stored in order of cooking temperature? Poultry at the bottom, whole cuts above it, ready-to-eat on top.
- Are boxes off the floor? Are foods labeled and dated? Is anything past its date?
- Are wiping cloths in a sanitizer bucket, and is the strength tested? See the sanitizer log.
Minutes 40–50: equipment, dishwashing and chemicals
- Dish machine: do final rinse temperature or sanitizer strength match the plate on the machine? See the dishwasher log.
- Are chemicals stored below and away from food, labeled, and in their own containers?
- Is the thermometer used for food the one you calibrated? See the calibration log.
Minutes 50–60: building, pests and papers
- Gaps under doors, droppings, flies, a dripping condenser line. Check the pest control log.
- Permits and manager certificates on the wall and in date. Staff training records on file. See food safety training records.
- If you have a written HACCP plan, ask to see it, then ask a cook to show where their step is in it. See the HACCP plan for a restaurant.
A score sheet you can copy
Use three columns, one line per finding:
| Finding | How serious | Fix, who, by when |
|---|---|---|
| Walk-in at 46°F at 1 p.m.; door open during delivery | High: food at risk now | Move food to the reach-in, call the repair line, recheck in 30 minutes. Chef. Today. |
| No sanitizer test strips at the bar | Medium | Buy strips, add to opening checklist. Bar lead. Friday. |
| Cooling log blank for Tuesday | Medium: a record gap | Ask the closer; retrain; add a manager sign-off. GM. This week. |
| Dust on the hood filter | Low | Add to weekly clean list. Dish lead. Next week. |
"High" means food that may make someone sick if it is served as it is now. Fix those before you open the next service. "Medium" means a missing control or record. "Low" means looks and upkeep. Do not rank by how easy a fix is; rank by how close it is to a customer's plate.
What inspectors tend to write up, and what to check first
Check your area's own published results, because they differ. In general the same few items keep coming up: food held out of temperature, no sanitizer or the wrong strength, handwashing sinks blocked, food not labeled or dated, and cleaning of food-contact surfaces. Our own plain list is in restaurant food safety violations, and the full item-by-item sheet is in the inspection checklist. If your restaurant has a past citation, start there. Past citations are the thing an inspector will look at first on a return visit.
Hiring a mock inspection company: what to ask
- What standard do you score against? The answer should be the local code, not only a private checklist. If it is a private one, ask how it maps to the local form.
- Who does the walk, and what is their background? A former inspector or a person with a food protection manager credential is a reasonable minimum. Ask for the name and check it.
- Is the visit announced? Unannounced visits show more, but they are not always possible.
- What do I get? A written report with photos and a fix list is useful. A score alone is not.
- What does it cost, in writing? Prices are set by each firm. We do not list one, because we could not source a fair range. Ask for a flat fee and what a second visit costs.
- Do you sell anything else? Some firms use the visit to sell software or training. That is not wrong, but know it before you book.
What to do with the findings
- Fix the "high" items the same day. Re-probe, re-test, write the fix on the log.
- Write corrective actions on the log itself. "Walk-in 46°F, moved food, called repair, rechecked 40°F at 2:30." An inspector believes a record that shows a problem and a fix more than a clean row of identical numbers.
- Look for the cause, not the symptom. Three blank cooling logs means nobody owns the step. Give the step a name and a time.
- Retrain on the one or two items that repeat. A five-minute huddle beats a long manual. See HACCP training for restaurant staff.
- Walk it again in 30 days with a different person. Compare the sheets. If the same item shows up twice, the fix did not work.
How often should you run a mock inspection?
A full walk once a month is a good habit for a busy kitchen. A quick 15-minute version of the temperature part each week costs little. Run an extra one before a known event: a catering job, a sale of the restaurant, a landlord or franchisor visit, or the week after a staff change. Compare the sheet from last month with this month's and look for repeats. See HACCP verification activities for a daily-to-yearly checking schedule.
Mock inspection, audit and the real thing: how they differ
A mock inspection practices the government visit. A private audit measures your system against a standard you chose, often one a buyer or franchisor requires. A self-audit checks your own plan against your own records. They overlap but are not the same: see restaurant food safety audits for who does each one. If your mock inspection keeps finding the same missing records, the fix is usually a plan and a set of logs written from your actual menu; the HACCP audit checklist shows how to test that.
Questions
What is a mock health inspection?
A practice inspection with no score on record. Someone walks your kitchen with the real checklist, writes what they find, and you fix it before the real visit.
How much does a mock health inspection cost?
Doing it yourself costs an hour of time. A firm sets its own fee, and so we do not quote one; ask for a flat price in writing. A health department consultation visit is free in some places and not offered in others.
Can I ask my health department for a practice visit?
You can ask. Some offer consultation or pre-opening visits; others do not. Call and ask whether they offer a non-scored visit for an open restaurant.
How often should I do one?
Monthly for a full walk, weekly for a 15-minute temperature check, and again before any event or audit.
What do inspectors look at first?
Usually the person in charge, handwashing, and food temperatures. These are tied to the main causes of food illness [1].
Do I need a HACCP plan to pass?
Most restaurants do not need a written plan for a routine inspection, but a plan with logs makes the temperature questions easy to answer. See do restaurants need a HACCP plan.
To get the plan and the logs written from your own menu, see your plan.
Sources
- U.S. Food and Drug Administration, "FDA Report on the Occurrence of Foodborne Illness Risk Factors in Fast Food and Full-Service Restaurants": the five risk factors. https://www.fda.gov/food/retail-food-protection/fda-report-occurrence-foodborne-illness-risk-factors-fast-food-and-full-service-restaurants
- FDA Food Code 2022: hot and cold holding, cooling, reheating, thermometers, person in charge. https://www.fda.gov/food/retail-food-protection/fda-food-code